Old products

<?=$ecms_gr[title]?>
Model: RC-MB07A

Five function Electrical Hospital Bed for Intensive Care Unit

Fill in the form to get more product information

Product Introduction

  • Generic name: Bed, hospital, standard, with mattress.

    Clinical or other purpose: Standard bed for the patients for the hospitals.

    Detailed requirements: Overall Size Should not be less than following parameters.

    ±10% variance accepted: Length: 2100mm, Width: 1000mm, Height: 500 - 700mm.

  • Required Functions

    Head rest adjustment (0deg – 85 deg).

    Leg Rest Adjustment (0deg – 45 deg).

    Height Adjustment (450mm – 700mm) ±10%.

    All above functions shall be operated by smooth manual cranks and the manual crank should have an over turning protection mechanism.

    - Collapsible Alloy Side Railings should be available on both sides of the bed.

    - Wall protection rubber bumpers should be available at all four corners.

    - At least two provisions required for IV pole on head end of the bed with one IV pole.

    - ABS Molded Detachable Head and Foot Boards required.

    - At least 120mm diameter TPR, nonrusting, Swiveling, castors with diagonal locking.

    - Main top and bottom framework made of 1.5”x2.5” GI Rectangular tubes of 1.6mm thick.

    - 18G Perforated CRC/MS Sheet for mattress base in four sections.

    - All materials should be pretreated and finished with epoxy powder coating.

    - Non foldable Mattress of 25mm soft density layer and 75mm high density bottom layer should be supplied with the bed. It shall be covered with a medical grade cover.